Description TSURUMI LC1.4S 110V Submersible Puddle Pump LSC1.4S Puddle sucker flood pump for pumping dirty site water from a flat surface down to 1mm. Used widely by hire outlets, utilities and flood control companies. Features: -The dual position outlet gives option of non kink horizontal pumping and the integral swing check valve to prevent back flow during vertical pumping. -A tough contractors puddle pump designed to operate for extended periods in seepage conditions. -The LSC1.4S Puddle sucker flood pump is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. -It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking. -For durability, during robust handling, puddle sucker flood pump has a pressed steel outer casing and a cast aluminium pump stand to offer increased protection of the steel and rubber base plate. -A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. -An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose. -Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hardwearing double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber that has an oil lifter to maintain seal lubrication during operation in any position. -This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. -Supplied with 10 metres of heavy duty rubber power cable. -Management of water levels can be controlled with a SwitcH20 system or a Tsurumi Sensor E. The SwitcH20 consists of 3 probes, in 304 stainless steel, that are set in an epoxy-resin filled holder and they represent on, off and common. -The SwitcH20 here is supplied with a Simplex control panel and 10 metres of low voltage, PVC power cable. -The Sensor E is an electronic float switch with stainless steel probes. -These are encapsulated in impact resistant moulded rubber, hence this switch is suited to portable applications. -However, the compact design and precise level control also make it suitable for fixed installations and narrow or shallow sumps. Sensor E is supplied with probe extensions to enable pumping down to 85mm, or further, depending on the sump size/area being drained. -The extensions are an optional extra for the standard Sensor. LSC14s puddle pump is manufactured by Tsurumi. Specifications Model LSC1.4S – 110V Length (mm) – Height (mm) 316 Manual / Auto Manual Outlet (mm) 25 kW 0.48 Volts 110V Flow (l/min) 170 Head (metres) 11 Free Passage (mm) 6 Dia x H (mm) 196 Width (mm) – On Level (mm) – Off Level (mm) – Dry weight (kg) 12 Packing weight 13.75 Displacement 349 cc Bore×Stroke 78mm×73mm Compression ratio 21?1 Net power 4.9kW/3600rpm Rated speed 3600r/min Oil capacity 1.1 L Fuel tank capcity 3.5 L Pump type Centrifugal,self priming Dia.of discharge port 80 mm Dia.of suction port 80 mm Max suction 6 m Max lift 30m Max delivery voulme 60m3/hr Dimension 570×490×550 Net weight 52.5 kg Model LC78F/D350F
